contact us

Your Closest Store:
SYD: 02 8488 1099    MEL: 03 8652 1510    BNE: 07 3703 1350
03 8372 12 00

Candle Making Kit Guide

Kit Includes:

6 x Wick stickums, 15mm
6 x Wicks, HTP 83 - 150mm long tab
6 x Glassware, Oxford Medium base transparent white 
6 x Round warning labels, 40mm
3 x 300g bar of Summit Wax - Denali^
3 x 30ml candle fragrance oils
2 x Wick Holders
2 x Wooden Pegs
1 x Bamboo Stick
1 x Wax pouring jug 1 litre
1 x Thermometer

Candle making is so much fun and this 'Do It Yourself' kit is great for beginners and hobbyists alike. In a bid to share our passion, we have put together all the candle making basics you will need to get started. It's quick and easy. One block of soy wax and one bottle of candle fragrance oil will make two candles. We recommend that you make your candles in batches of two whilst you are learning.
We hope you enjoy candle making as much as we do!

Step 1

Setting up the glassware

Make sure your glassware is completely clean and dry in preparation for candle making. Any residues of wax or water can affect the end product result. Setting up the glassware: Place a round wick stickum on the end of the wick, then press down firmly to secure the wick in the centre on the inside bottom of the glass.

Next, centre the top of the wick using the wick holder and pull gently to straighten the wick, securing it in place with the wooden peg.

Setting up your candle glassware

Step 2

Melting and pouring the wax

We recommend the double boiler method to melt the wax.

Use one block of soy wax and ensure that the wax reaches a temperature of approximately 75C using the mercury thermometer provided.

Alternatively, use a microwave and microwave safe container (not included) to melt the wax.

Once molten, pour the wax into the 1 litre wax pouring jug.

Transferring the molten wax into a pouring jug

Step 3

Mixing and pouring the fragrance

Choose one of the fragrance oils, pour it into the molten wax and stir thoroughly using the bamboo stick. Once well mixed, slowly pour the combined wax and fragrance into the medium Oxford glasses your prepared earlier.

Be sure to leave approximately 1cm from the top of the glass rim. 

Pouring the molten wax into the candle glassware

Step 4

Finishing the candle

Once completely set, remove the wick holder and peg, and then trim the wick to approximately 1cm above the wax.

 Allow the candles to set for a minmum  of 3 days to 2 weeks before burning. 


Trimming the candle wick on a set candle


Congratulations! Your first homemade soy candles are now ready to burn!

If you would like to take candle making to the next level, you can contact one of our friendly customer service representatives who can help you make the right product choices and offer you some helpful information to get you started on the right path.

Sydney: 02 8316 5530     Melbourne: 03 8372 1200

All products* in this kit can be purchased from our website If you've used our kit before and would like to restock, we have everything you will need in the below links:

HTP 105 wicks

HTP 83 Wicks

15mm wick stickums

15mm Wick Stickums

Oxford Medium Base Transparent White

Oxford Medium Base Transparent White

Summit Wax - Denali

Summit Wax - Denali

Champagne & Strawberries Fragrance Oil

Champagne & Strawberries Fragrance

Lotus Flower Candle Fragrance Oil

Lotus Flower Fragrance

Tropical Coconut Candle Fragrance Oil

Tropical Coconut Fragrance

Wick Holders

Wick Holders

Pouring Pot

Pouring Pot

40mm Warning Label

40mm Warning Label

^ Summit Wax - Denali minimum purchase size available is 1kg

* The wooden pegs and bamboo stick are accessories not sold on our website. These can be purchased from most retailers.