MATERIALS

• Ecosoya Pillar Blend - approximately 68 grams per mould
• Six cavity clamshell moulds (or other melt moulds)
• Fragrance (optional) - approximately 8% by weight or 6 grams per mould
• Mercury Thermometer

METHOD

• Double boiler setting

STEP 1: PREPARING THE WAX

Measure out the appropriate amount of wax you would like to use. Each clamshell mould requires approximately 74 grams of wax and fragrance. So a good figure to use is 68 grams of wax per clamshell mould and 6 grams of fragrance. If you are not using fragrance, use 74 grams of wax.

So if you were to pour 5 clamshell moulds at once, you would melt 340 grams of wax and 30 grams of fragrance.

STEP 2: MELTING THE WAX AND ADDING COLOUR

Melt the wax as per the manufacturer's instructions. We recommend a double boiler setting to heat the wax. You can also add in your candle colour if desired. Click here for information on which colours to use and how much.

STEP 3: ADDING FRAGRANCE

Add the fragrance at 8% by weight and mix thoroughly.

STEP 4: POUR

Carefully pour the wax mixture into clamshell moulds. Ideally you should not fill your clamshell mould all the way to the top, but rather 5mm below the top so that you can easily close the lid of the mould.

STEP 5: CURE

Allow to set for at least 24 hours.

STEP 6: FINISHING OFF

You may either leave the melts in the mould and use, or sell them using the packaging as a container. Alternatively, you can carefully remove them from the mould and house them in new packaging. Then you can gently wash your mould with a paper towel and rubbing alcohol and use it again in the future!

If you have any questions or concerns, please do not hesitate to get in touch with our friendly team. You can call our customer service teams in Sydney on 02 8316 5530 or in Melbourne on 03 8372 1200, use the 'live chat' function on our website, email us at [email protected] or even fill out a query form on our contact us page.

DISCLAIMER

Website Disclaimer: References to other sites are provided as an information service only and should not be construed as an endorsement of any organisation or product. Conversely, omissions should not be construed as non-endorsement. Although care has been taken to provide links to suitable material from this site, no guarantee can be given about the suitability, completeness or accuracy of any of the material that this site may be linked to or other material on the Internet. Eroma Store Pty Ltd will not accept any responsibility for the content of material that may be encountered.

General Disclaimer: While every effort has been made to ensure the accuracy and completeness, no guarantee is given nor responsibility taken by Eroma Store Pty Ltd for errors or omissions in this information and Eroma Store Pty Ltd does not accept responsibility in respect of any information or advice given in relation to or as a consequence of anything contained above. The above information is issued by Eroma Store Pty Ltd for guidance only and we acknowledge that other important precautions may be applicable and that are not contained in this document. Therefore we take no liability for the information contained above in any way, shape or form and we recommend that you seek further information from the relevant authority.