Candle Making Supplies
- Soap Bath & Body Supplies
- Home Fragrance Supplies
Product Description: This is a universal centering device to keep the mould pin in the middle. It has several grooves to make it work on all of our moulds, small to large. You will have to purchase the mould pin/s in addition to this. When using this device, never pour your candle to the top of the mould as molten wax will come into contact with this pin locator and potentially clog the grooves up.
Q. How does the wick pin and pin locator work with the mould?
A. All you need to do before you begin your pour is to apply a pin locator to the open top of the mould (one locator will fit all moulds). Take your appropriate wick pin and put this through the top of the locator where there is a hole in the middle. Slide the pin all the way down to the bottom of the mould where you will see a hole located. Once the pin has entered the hole at the bottom of the mould, then you are now ready to pour.
Q.Will the Locator fit with every mould?
A. Yes! These locators will fit on all moulds with a diameter of 51mm, 76mm and 102mm.